RPM 80595 Traxxas Querlenker hinten Slash 2WD blau

Artikelnummer: 477-RPM80595-2017
GTIN: 0672415805954
Hersteller: RPM

12,29 €

inkl. 19% USt. , zzgl.

Sofort verfügbar
Lieferzeit: 0 - 2 Werktage (DE - Ausland abweichend)

Stück

Beschreibung
Bewertungen

Traxxas Slash 2wd Rear A-arms
RPM rear A-arms for the Traxxas Slash 2wd are designed specifically for the Slash - they are not multi-platform A-arms like the stock versions.

Our first design challenge was to beef up the rear A-arms to handle some serious abuse. The material around the inner and outer hinge pins has been increased by a whopping 64%! We then eliminated all of the unnecessary holes and shock mounts that would be needed on other vehicles but not on the Slash, which significantly reduced the weight of our A-arms while improving crash durability. Even after all of the increased muscle has been factored in, our A-arms still come in at over 10% lighter than the original arms! Our final design task was to improve the fit and finish and what we came up with will eliminate most of the slop in the rear suspension system! The Slash owner can tighten things up to near perfect out back simply by adding in a set of our #80382 Rear Bearing Carriers currently available. RPM Slash 2wd rear A-arms use stock suspension geometry and include stock rear toe angles.

RPM Slash 2wd rear A-arms are not only stronger and more durable than stock, they are also more rigid and less flexible too, making them the perfect addition to those race-level Slashes on the track. Additionally, the new geometry design leaves no place for dirt and rocks to get caught in the lower A-arm and reduces the chances of rocks and debris getting stuck between the axle and the arm.

RPM Slash 2wd rear A-arms are sold in pairs. They are molded in our nearly indestructible blend of nylons and are sold in either black our blue. These A-arms are backed by our limited lifetime warranty against breakage as well for confidence-inspiring durability and performance.

Tech Notes: Stock rear axle carriers have an upper and lower hinge pin hole. RPM Slash 2wd Rear A-arms only allow the use of the original, lower hole location to be used. The upper axle carrier hole (which would lower the ride height in the back too much) cannot be used. To lower the rear end of the truck, RPM recommends using the outer shock mount hole positions in the A-arm.

80592 Black Rear A-arms for the Traxxas Slash
80594 Green Rear A-arms for the Traxxas Slash
80595 Blue Rear A-arms for the Traxxas Slash

Angaben zur Produktsicherheit

Herstellerinformationen:

RPM R/C Products
Sierra Bonita Lane 14978
Kalifornien
Chino, Vereinigte Staaten, 91710
https://www.rpmrcproducts.com

verantwortliche Person:

HOECO Handels GmbH
Fischagasse 44
Niederösterreich
Ebreichsdorf, Österreich, 2483
office@hoeco.at
https://www.hoeco.at/