RPM 80582 Traxxas Radträger Axle Carriers E-Revo E-Maxx

Artikelnummer :
477-RPM80582-2017
35,57 €

inkl. 16% USt., zzgl. Versand

Stück
 
sofort verfügbar

Lieferzeit: 1 - 2 Werktage

Beschreibung

Traxxas Revo, Slayer, T-Maxx 2.5R / 3.3 & E-Maxx 16.8V Axle Carriers

Includes oversized bearings, carriers, & setscrews

Fits all versions of the Traxxas Revo and Slayer

RPM axle carriers for the Traxxas Slayer, Revo, T-Maxx 2.5R, T-Maxx 3.3 & E-Maxx 16.8 have been painstakingly redesigned to improve the durability, strength, and reliability of these much-abused parts. Check out this laundry list of features built into each set of RPM Revo carriers:

Axle Carriers:

  • Stock replacement - no modifications are needed to bolt them in.
  • Larger bearing bores accept RPM oversized bearings.
  • Included in each kit are two 15mm bearings and two 21mm bearings.
  • The wall thickness around the pillow-balls has been increased by 40% - eliminating split walls!
  • More than 20% more material supports the pillow-balls, preventing them from pulling through.
  • Redesigned reinforcing rib supporting the tie rod mount.
  • Redesigned boot lock tabs making removal of the silicone boots easier.
  • Press-fit bearings in the carrier means reduced movement of the axle in the carrier.


Oversized Bearings:
  • Outer bearings are 6x15x5mm (stock is 6x12x4mm).
  • Inner bearings are 12x21x5mm (stock is 12x18x4mm).
  • Wider bearings create an additional 2mm of contact with the axle for smoother, longer running performance.RPM Bearing Comparison v. Stock
  • 3mm. larger bearings have balls a full 33% larger than stock!
  • The load ratings of RPM oversized bearings are double that of stock bearings and more than triple the fatigue rating of stock bearings as well!

Pillow-Ball Setscrews:

  • Two-piece design uses aluminum and Delrin for the ultimate in holding power under extreme situations.
  • Our aluminum setscrews reduce movement of the pillow-balls in the carrier.
  • Our Delrin bushing caps have more than twice the contact area on the pillow-ball, keeping the pillow-balls locked in place at all times.


RPM Slayer, Revo, T-Maxx 2.5R, T-Maxx 3.3 & E-Maxx 16.8 axle carriers are sold with 1 left and 1 right axle carrier, 2 outer 15mm bearings, 2 inner 21mm bearings, 4 aluminum setscrews, 4 Delrin bushing caps, and detailed instructions to help install them on your truck.

Replacement bearing sets (#80570) come with 2 inner 21mm bearings & 2 outer 15mm bearings.

Tech Note:
Due to increased material to support the pillow balls from pulling through the carrier, RPM Axle Carriers will not work in conjunction with Slayer / Revo 120-LT Long Travel rockers (Traxxas #5356).

RPM Recommendations:
To prolong the life of your bearings, RPM recommends the use of our #81170 Bearing Blaster. For accurate camber adjustments, please consider the use of our #70950 Monster Camber Gauge.

Lieferumfang:
80582  Slayer, Revo & T/E-Maxx Axle Carriers & Bearings - Black

Bewertungen 1

Durchschnittliche Artikelbewertung

4 Sterne
3 Sterne
2 Sterne
1 Stern

Teilen Sie anderen Kunden Ihre Erfahrungen mit:

5 von 5
RPM 80582 Traxxas Radträger

Wie immer Top Wahre

., 26.12.2014